As longtime readers will remember last August I purchased and reviewed the motorcycle lift table sold by Harbor Freight Tools. Several months later I am still happy with my purchase. But since 90% of the time I just use my table for general maintenance and cleaning (plus I removed the centerstand from my motorcycle), I decided to modify it slightly by adding a different wheel chock and placing 2 eye bolts closer to the front tire end of the table to use as tie downs. Here are some pics for you.
This was mainly done for conveince as I can just roll a motorcycle right up into the chock and strap it in for minor work. It is ironic however that for my first serious job (a GL1200 Gold Wing) right after installing this I may have to remove it so that I am able to work on the front forks & brakes.
Peace Y’all
hi where can i get some wings for that lift,or side exstions?
Unfortunately Harbor Freight no longer sells a table with extensions and, this model is not designed for them. If you’re working on atvs or snow sleds this is a pain in the butt. If you have the extra dough I’d try this place;
http://www.nhproequip.com/
Hopefully you can find what you need.
Where did you actually acquire the recommendations to publish ““Harbor Freight Motorcycle Lift Table Update | Life on 2
Wheels (& other stuff)”? Thanks a lot ,Angelika
This review is based strictly on my own experience as a consumer. I purchased the table on my own with no consideration given or asked for the review. The review was done strictly to share my personal experiences with others who may be considering the purchase of this style of lift.